LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View of Trim Panel With Screws
    GM1242050Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the trim panel screws.
  3. Remove the trim panel.
    4. Fig 2: Connecting Stop Lamp Switch And Connector Assembly
    GM1242051Courtesy of GENERAL MOTORS CORP.
  4. Turn the stop lamp switch and the connector assembly, and pull it from the brake pedal bracket.
  5. Separate the stop lamp switch from the connector to replace the stop lamp switch.
scientia non olet · About LEMON Manuals