LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Repair Instructions >> Ignition Lock Cylinder and Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    Fig 1: Lower Steering Column Cover Panel & Screws
    GM1248378Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable.
  2. Remove the lower steering column cover panel by removing the screws.
    3. Fig 2: Lock Cylinder & Switch Cylinder Housing
    GM1248387Courtesy of GENERAL MOTORS CORP.
  3. With the key in the ignition, turn to ACC and remove the lock cylinder.

    To remove the lock cylinder of the switch cylinder housing, press down the detent spring with a 2.5 Allen wrench, or other suitable tool, and pull out the lock cylinder.

    4. Fig 3: Ignition Switch & Retaining Screw
    GM1248388Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition switch retaining screw.
  5. Disconnect the wiring and remove the ignition switch.
scientia non olet · About LEMON Manuals