Rear Upper Valve Body Components: Assembly

Assemble each component by reversing disassembly procedure and noting the following points.

• Coil outer diameter and free length of each valve spring should be as listed below. Be sure to use each one of correct size.
  Fig 1: Coil Outer Diameter And Free Length Of Each Valve Spring Chart

  Courtesy of SUZUKI OF AMERICA CORP.
• Use new rear upper valve body gasket.
• Tighten plate bolt to specified torque (1) to specified torque.

  Tightening torque 

  1. Plate bolt: 5.5 N.m (0.55 kg-m, 4.0 lb-ft)

Fig 2: Tightening Plate Bolt

Courtesy of SUZUKI OF AMERICA CORP.