Oil Pump Disassembly and Assembly: Assembly

Assemble each component by reversing removal procedure and noting the following points.

• Before installing inner gear and outer gear to pump body, apply A/T fluid to them.
• When installing pump cover, use care so that its splined part will not cause damage to oil seal and use specified torque to tighten it to pump body.

  Tightening torque 

  1. Oil pump bolt (a): 7.5 N.m (0.75 kg-m, 5.5 lb-ft)
  Fig 1: Installing Pump Cover

  Courtesy of SUZUKI OF AMERICA CORP.
• When installing O-ring and oil seal, apply enough A/T fluid to them and fit them securely in groove.
• After installation, check that inner gear turns smoothly by making use of torque converter.
• When installing seal ring, it should not be opened more than necessary.
• Fit claws of seal ring securely.