Ignition Coil: Testing and Inspection

Ignition Coil Assembly (Igniter and Ignition Coil) Inspection
Check ignition coil assembly for the following:
- Damage
- Deterioration
- Terminal for corrosion

Ignition Coil (Plug Cap) Inspection
1. Remove ignition coil assemblies referring to "Ignition Coil Assembly (Igniter and Ignition Coil) Removal and Installation.




2. Check ignition coil assembly for damage, deterioration and terminal corrosion. If defective condition is found, replace.
3. Install ignition coil assemblies referring to "Ignition Coil Assembly (Igniter and Ignition Coil) Removal and Installation.