LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Forenza S, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater And Ventilation >> Repair Instructions >> Temperature Control Cable Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Temperature Control Cable Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Remove the center molding.
    Fig 1: Removing The Center Molding
    G00786095Courtesy of SUZUKI OF AMERICA CORP.
  3. Disconnect the mode control cable from the mode door.
  4. Disconnect the temperature control cable eyelet from the post on the controller.
  5. Pry off the clip of the temperature control cable.
    Fig 2: Disconnecting The Mode Control Cable
    G00786096Courtesy of SUZUKI OF AMERICA CORP.
  6. Slide the cable eyelet off the post on the temperature door lever.
  7. Pry off the clip of the temperature cable.
    Fig 3: Disconnecting The Temperature Control Cable
    G00786097Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals