Control Assembly Knob Lighting Removal

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the heating and ventilation system control assembly. Refer to Control Assembly Removal .

Fig 1: Removing Heating & Ventilation System Control Assembly

Courtesy of SUZUKI OF AMERICA CORP.

Disconnect the small connector to the vacuum control switch on the rear of the assembly case.
Separate the control assembly case halves.
Turn the bulb holder to the left and pull out the bulb.

Fig 2: Turning Bulb Holder To Left & Pulling Out Bulb

Courtesy of SUZUKI OF AMERICA CORP.