Knock Sensor Removal

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the VIS vacuum tank. Refer to "VIS Vacuum Tank"

Fig 1: Removing VIS Vacuum Tank

Courtesy of SUZUKI OF AMERICA CORP.

Remove the wiring harness from the wiring support bracket.

Fig 2: Removing Wiring Harness From Wiring Support Bracket

Courtesy of SUZUKI OF AMERICA CORP.

Disconnect the knock sensor wiring harness connector.
Remove the knock sensor.

Fig 3: Removing Knock Sensor

Courtesy of SUZUKI OF AMERICA CORP.