LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Forenza S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Automatic A/C Systems) >> Diagnostic Information and Procedures >> Scan Tool Data Definitions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Data Definitions

WARNING: This page is about a different car, the 2004 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.

TEMP CONT SWITCH:  Position of temperature control selector of HVAC control module

CABIN TEMPERATURE:  In-air temperature detected by inside air temperature sensor installed in HVAC control module

OUTSIDE AIR TEMP:  Outside air temperature detected by outside air temperature sensor installed on 4WD air pump assembly bracket in front bumper

EVAPORATOR TEMP:  Temperature of air passed through evaporator

COOLANT TEMP:  Engine coolant temperature detected by engine coolant temperature sensor

SUNLOAD:  Amount of sunlight detected by sunload sensor installed on the driver side on the dashboard

MODE CONT SWITCH:  Position of airflow selector of HVAC control module

FAN CONT SWITCH:  Position of air speed selector of HVAC control module

FAN DESIRE VOLT:  Voltage for blower motor

AIR MIX POS SENSOR:  Input signal from position sensor in temperature control actuator

MODE POS SENSOR:  Input signal from position sensor in air flow control actuator

A/C CONT SIG (ON or OFF):  State of A/C indicator lamp

BLOWER FAN LOAD (ON or OFF):  ON: Position of blower speed selector is 1st or 2nd position / OFF: Position of blower speed selector is more than 3rd position.

AIR INTAKE MODE (FRE, REC or MIX):  State of air intake mode

A/C INDICATOR LAMP (ON or OFF):  State of A/C indicator lamp

REC INDICATOR LAMP (ON or OFF):  State of recirculation air (REC) indicator lamp