Engine Mount (LH) Installation

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Installation should follow the removal procedure in the reverse order.
Install the engine mount (LH).
Tighten
1. Tighten the four (4) transaxle mount cage-to-longitudinal member bolts to 55-75 N.m (41-55 lb-ft).
2. Tighten the transaxle mount cage-to-transaxle mount bracket bolt to 55-75 N.m (41-55 lb-ft).
3. Tighten the transaxle mount cage-to-transaxle mount bracket nut to 55-75 N.m (41-55 lb-ft).
4. Tighten the transaxle mount cage through bolt to 100-120 N.m (74-89 lb-ft).

Fig 1: Installing Engine Mount (LH)

Courtesy of SUZUKI OF AMERICA CORP.