Pull-In Test

WARNING: This page is about a different car, the 2004 Suzuki Aerio, 2003 Suzuki Aerio, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before testing, disconnect lead wire from terminal "M".

Connect battery to the magnetic switch. See Fig 1 . Check that plunger and pinion move outward. If plunger and pinion don't move, replace the magnetic switch.

Fig 1: Performing Starter Solenoid Pull-In Test

Courtesy of SUZUKI OF AMERICA CORP.