LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Forenza S, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Idle Air Control Valve Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Air Control Valve Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Remove the air intake resonator.
  3. Disconnect the idle air control (IAC) valve connector.
  4. Remove the IAC valve retaining bolts.
    CAUTION: On IAC valves that have been in service, do not push on the valve pintle. The force required to move the pintle may damage the threads on the worm drive.
  5. Remove the IAC valve.
    CAUTION: Do not use methyl ethyl ketone because it can damage the parts.
  6. Clean the IAC valve O-ring seal area, the pintle valve seat, and the air passage with a suitable fuel system cleaner.
    Fig 1: Removing The IAC Valve
    G00767191Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals