LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Forenza S, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Wheel Speed Sensor Removal and Installation: Installation

  1. Install the front wheel speed sensor to the steering knuckle. Secure it with the bolt.

    Tighten 

    Tighten the front wheel speed sensor bolt to 8 N.m (71 lb-in).

    Fig 1: Installing The Front Wheel Speed Sensor
    G00766051Courtesy of SUZUKI OF AMERICA CORP.
  2. Feed the sensor harness into the engine compartment, insert it into the grommet, and secure the grommet into the hole in the strut tower.
  3. Secure the harness into the grommet holders and the clamps under the fender.
  4. Install the wheel.
  5. Lower the vehicle.
  6. Connect the front wheel speed sensor electrical connector.
    Fig 2: Connecting The Front Wheel Speed Sensor Electrical Connector
    G00766052Courtesy of SUZUKI OF AMERICA CORP.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals