Scan Tool Method
The scan tool can clear ABS system DTCs using the mass storage cartridge.
- Install the scan tool and the mass storage cartridge.
- Select "Fault Memory."
- Select "Clear Fault Memory."
Clearing the fault memory cannot reset a valve relay which was shut down when the fault was recognized. Changes are possible only after the fault has been eliminated and the next ignition cycle has begun.
DIAGNOSTIC TROUBLE CODES (DTC) LIST
| DTC | Description |
|---|---|
| DTC C0035 | Left Front Wheel Speed Sensor Circuit Malfunction |
| DTC C0040 | Right Front Wheel Speed Sensor Circuit Malfunction |
| DTC C0045 | Left Rear Wheel Speed Sensor Circuit Malfunction |
| DTC C0050 | Right Rear Wheel Speed Sensor Circuit Malfunction |
| DTC C0060, C0065 | Left Front Inlet and Outlet Valve Solenoid Fault |
| DTC C0070, C0075 | Right Front Inlet and Outlet Valve Solenoid Fault |
| DTC C0080, C0085 | Left Rear Inlet and Outlet Valve Solenoid Fault |
| DTC C0090, C0095 | Right Rear Inlet and Outlet Valve Solenoid Fault |
| DTC C0110 | Pump Motor Circuit Malfunction |
| DTC C0121 | Valve Relay Circuit Malfunction |
| DTC C0161 | ABS Brake Switch Circuit Malfunction |
| DTC C0245 | Wheel Speed Sensor Frequency Error |
| DTC C0550 | ABS Control Module Internal Fault |
| DTC C0800 | Low Voltage Fault |
| DTC C0931 | Overheated |