LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Forenza S, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Specifications & Procedures) >> Adjustments >> Toe-In Adjustment >> Rear
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Toe-In Adjustment: Rear

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure toe-in and compare to WHEEL ALIGNMENT SPECIFICATIONS  . If toe-in is not within specification, go to next step.
  2. Loosen front parallel link cam bolt to crossmember. See Fig 1 . Tighten front parallel link cam bolt to stage 1, see TORQUE SPECIFICATIONS  . Adjust rear toe-in to specification. See WHEEL ALIGNMENT SPECIFICATIONS  .
  3. After adjustment, finish tightening front parallel link cam bolt to stage 2. See TORQUE SPECIFICATIONS  .
Fig 1: Adjusting Rear Toe-In
G00296724Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals