Toe-In Adjustment: Rear
WARNING: This page is about a different car, the 2004 Suzuki Aerio and 2003 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
- Measure toe-in with toe-in gauge and compare to WHEEL ALIGNMENT SPECIFICATIONS . See Figure. If toe-in is not within specification, go to next step.
- Loosen right and left control rod inner nuts. Rotate right and left control rod inner bolts (cam bolts) by the same amount to align toe-in to specification. See Fig 1. In this adjustment, right and left tie rods should become equal in length.
- After adjustment, tighten right and left nuts to specified torque while holding cam bolt with another wrench to prevent it from turning. See TORQUE SPECIFICATIONS .