LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Forenza LX, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Repair Instructions >> Fuel Pump Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Removal and Installation: Removal

WARNING: The fuel system is under pressure. To avoid fuel spillage and the risk of personal injury or fire, it is necessary to relieve the fuel system pressure before disconnecting the fuel lines.
  1. Relieve the fuel system pressure.
    1. Remove the fuel cap.
    2. Remove fuel pump fuse Ef18 from the engine fuse block.
    3. Start the engine and allow the engine to stall.
    4. Crank the engine for an additional 10 seconds.
  2. Disconnect the negative battery cable.
  3. Remove the rear seat.
  4. Remove the fuel pump access cover.
    Fig 1: Removing The Fuel Pump Access Cover
    G00767045Courtesy of SUZUKI OF AMERICA CORP.
  5. Disconnect the electrical connector at the fuel pump assembly.
  6. Disconnect the fuel line.
    Fig 2: Disconnecting The Electrical Connector
    G00767046Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove the fuel pump assembly clip.
  8. Remove the fuel pump assembly from the tank.
    Fig 3: Removing The Fuel Pump Assembly
    G00767047Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals