Tools Required

DW260-050 P/N Switch Installer

1. Install the park/neutral start switch.

   Tighten 

   Tighten the bolts to 10 N.m (89 lb-in).

2. Adjust the park/neutral switch using the P/N switch installer DW260-050.
   NOTE: When install the park/neutral switch, using the special service tools and the shift lever must be positioned "Neutral".
   Fig 1: Adjusting The Park/Neutral Switch

   Courtesy of SUZUKI OF AMERICA CORP.
3. Install the shift lever and the shift lever nut.
   Fig 2: Installing The Shift Lever

   Courtesy of SUZUKI OF AMERICA CORP.

   Tighten 

   Tighten the shift lever nut to 10 N.m (89 lb-in).

4. Connect the shift control cable and the retaining clip.
   Fig 3: Connecting The Shift Control Cable And The Retaining Clip

   Courtesy of SUZUKI OF AMERICA CORP.
5. Connect the park/neutral position switch electrical connector.
6. Connect the negative battery cable.