Control Arm Bushing: Service and Repair

Control Arm Bushings Disassembly and Assembly

Tools Required:
DW320-020 Remover/Installer
KM-158 Remover/Installer

Disassembly
1. Remove the control arm.





2. Remove the split sleeves from the rear control arm bushing.





3. Press off the control arm rear damping bushing using a press and the remover/installer KM158.

Assembly





1. Press the control arm rear damping bushing into the control arm using a press and the remover/installer KM-158.
2. Install the split sleeves into the rear control arm bushing.





3. Install the control arm.