Headlamp: Service and Repair

Headlamps / Front Turn Signal Lamps / Parking Lamps Removal and Installation

Removal
1. Disconnect the negative battery cable.




2. Remove the headlamp mounting bolts and nut.
3. Disconnect the electrical connectors.
4. Remove the turn signal bulb.
5. Remove the headlamp assembly.
6. Remove the cap concealing the headlamp bulb.
7. Disconnect the headlamp bulb electrical connector.




8. Remove the headlamp bulb.

Installation
1. Install the headlamp bulb.
2. Connect the headlamp bulb electrical connector.
3. Install the cap concealing the headlamp bulb.
4. Install the turn signal bulb.
5. Connect the electrical connectors.
6. Install the headlamp assembly with the bolts and nut.







7. Connect the negative battery cable.

Tighten: Tighten the headlamp assembly bolts and nut to 4 Nm (35 in. lbs.).