Shift Cable: Removal

Disconnect the negative battery cable.
Remove the clip from the selector lever connection on the transaxle case and disconnect the shift control cable from the selector lever connection.
Remove the clip from the shift control cable at the transaxle mount connection. See Fig 1 .
Remove the floor console. See FLOOR CONSOLE .
Loosen the shift control cable adjuster pinch nut.
Remove the shift control cable from the shift control assembly. See Fig 2 .
Remove the shift control cable from the transaxle mount.
Pull the shift control cable through the fire wall of the vehicle, bringing the rubber grommet with it. See Fig 3 .

Fig 1: Removing Clip From Shift Control Cable

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Removing Shift Control Cable From Shift Control Assembly

Courtesy of SUZUKI OF AMERICA CORP.

Fig 3: Pulling Shift Control Cable Through The Fire Wall

Courtesy of SUZUKI OF AMERICA CORP.