Toe-In Adjustment: Front
WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
- Measure toe-in and compare to WHEEL ALIGNMENT SPECIFICATIONS . If toe-in is not within specification, go to next step.
- Loosen front toe-in adjusting nuts and rotate right and left outer tie rods by the same amount to align toe-in to specification. See Fig 1 and WHEEL ALIGNMENT SPECIFICATIONS . In this adjustment, right and left tie rods should become equal in length.
- After adjustment, hold outer tie rod and tighten adjusting nut to specified torque. See TORQUE SPECIFICATIONS . Reconnect outer tie rods to knuckle assemblies.