Floor Jack

WARNING: This page is about a different car, the 2004 Suzuki Aerio and 2003 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.

On 2WD vehicle, place the jack against the front end of the engine mounting member or rear suspension frame. On 4WD vehicle, place the jack against the jacking bracket or rear differential. See Fig 1. If jacking up only one end of the vehicle, be sure to block the wheels on the ground in order to ensure safety. After the vehicle is jacked up, support it on jackstands. See Fig 2.

Fig 1: Identifying Jack Placement Locations

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Identifying Safety Stand Placement Locations

Courtesy of SUZUKI OF AMERICA CORP.