Rear Seat Center Armrest Installation

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

Install the armrest with the nuts.
1. Tighten the armrest nuts to 24 N.m (18 lb-ft).
Install the rear seatback backside cover with the retaining clips.
Raise and secure the rear seatbacks in the upright position.

Fig 1: Installing Armrest

Courtesy of SUZUKI OF AMERICA CORP.