LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Forenza EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Power Seats) >> Repair Instructions >> Power Driver Seat Slide Assembly Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Driver Seat Slide Assembly Installation

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  1. Install the slide assembly with the bolts and the screws.
    1. Tighten the slide assembly bolts to 25 N.m (18 lb-ft).
    2. Tighten the slide assembly screws to 10 N.m (89 lb-in).
  2. Connect the electrical connector.
  3. Install the front seat cushion. Refer to Front Seat Cushion Installation (for Power Driver Seat)  .
  4. Install the driver seat. Refer to Front Bucket Seat Installation (for Power Driver Seat)  .
Fig 1: Installing Driver Seat
G02996995Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals