Dual Horns Installation

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

Install the horn with the bolt.
1. Tighten the horn bolt to 9 N.m (80 lb-in).
Connect the electrical connector.
Connect the negative battery cable.

Fig 1: Installing Horn

Courtesy of SUZUKI OF AMERICA CORP.