VIS Valve Removal

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Disconnect the throttle cable by opening the throttle and moving the cable through the release slot.

Fig 1: Disconnecting Throttle Cable

Courtesy of SUZUKI OF AMERICA CORP.

Disconnect the vacuum hose from the VIS actuator.
Remove the VIS actuator and the VIS valve.
NOTE: Make sure the VIS valve flap is closed before removing the VIS valve.

Fig 2: Removing VIS Actuator & VIS Valve

Courtesy of SUZUKI OF AMERICA CORP.