VIS Valve Installation

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Installation should follow the removal procedure in the reverse order.
Install the VIS valve and the VIS actuator.
Tighten
1. Tighten the VIS valve retaining bolts to 10-13 N.m (89-115 lb-in).
2. Tighten the VIS actuator retaining bolts to 10-13 N.m (89-115 lb-in).

Fig 1: Installing VIS Valve & VIS Actuator

Courtesy of SUZUKI OF AMERICA CORP.