Knock Sensor Installation

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Installation should follow the removal procedure in the reverse order.
Install the knock sensor.
Tighten
1. Tighten the knock sensor retaining bolt to 18-20 N.m (13-15 lb-ft).

Fig 1: Installing Knock Sensor

Courtesy of SUZUKI OF AMERICA CORP.

Install the VIS vacuum tank.
Tighten
1. Tighten the VIS vacuum tank retaining bolts to 7-9 N.m (62-80 lb-in).

Fig 2: Installing VIS Vacuum Tank

Courtesy of SUZUKI OF AMERICA CORP.