Crankshaft Position (CKP) Sensor Removal

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the air filter outlet hose.

Fig 1: Removing Air Filter Outlet Hose

Courtesy of SUZUKI OF AMERICA CORP.

Disconnect the crankshaft position (CKP) sensor wiring harness connector.

Fig 2: Disconnecting CKP Sensor Wiring Harness Connector

Courtesy of SUZUKI OF AMERICA CORP.

Remove the crankshaft position (CKP) sensor heat shield housing.

Fig 3: Removing CKP Sensor Heat Shield Housing

Courtesy of SUZUKI OF AMERICA CORP.

Remove the CKP sensor.

Fig 4: Removing CKP Sensor

Courtesy of SUZUKI OF AMERICA CORP.