Crankshaft Position (CKP) Sensor Installation

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Installation should follow the removal procedure in the reverse order.
Install the crankshaft position (CKP) sensor.
Tighten
1. Tighten the CKP sensor retaining bolt to 5-8 N.m (44-71 lb-in).

Fig 1: Installing CKP Sensor

Courtesy of SUZUKI OF AMERICA CORP.

Install the CKP sensor heat shield housing.
Tighten
1. Tighten the CKP sensor heat shield housing bolt to 7-9 N.m (62-80 lb-in).

Fig 2: Installing CKP Sensor Heat Shield Housing

Courtesy of SUZUKI OF AMERICA CORP.