Fuel Pressure Regulator Removal and Installation: Installation

WARNING: This page is about a different car, the 2004 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.

For installation, reverse removal procedure and note the following precautions.

Use new O-ring (1).
Apply thin coat of gasoline to O-ring (1) to facilitate installation.

Fig 1: Applying Thin Coat Of Gasoline To O-Ring
Courtesy of SUZUKI OF AMERICA CORP.
Tighten fuel pressure regulator bolts (1) to specified torque.
Tightening torque

Fuel pressure regulator bolts (a): 11 N.m (1.1 kg-m, 8.0 Ft. Lbs.)

Fig 2: Tightening Fuel Pressure Regulator Bolts
Courtesy of SUZUKI OF AMERICA CORP.
With engine "OFF" and ignition switch "ON", check for fuel leaks around fuel line connection.