Accelerator Cable Adjustment
WARNING: This page is about a different car, the 2004 Suzuki Aerio, 2003 Suzuki Aerio, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
With accelerator pedal depressed fully, check clearance between throttle lever (2) and lever stopper (1) (throttle body) which should be within the following specification.
Clearance between throttle lever and lever stopper (with pedal depressed fully) "b" 0.5 - 2.0 mm (0.02 - 0.07 in.)
If measured value is out of specification, adjust it to specification with cable adjusting nut (4).