Throttle Position (TP) Sensor Removal and Installation: Installation
WARNING: This page is about a different car, the 2004 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
- Install TP sensor (1) to throttle body (2).
Fit TP sensor (1) to throttle body (2) in such way that its holes are a little away from TP sensor screw holes as shown in the figure and turn TP sensor (1) clockwise so that those holes align.
- Tighten TP sensor screw to specified torque.
Tightening torque
TP sensor screw (a): 2.5 N.m (0.25 kg-m, 1.8 Lb-ft)
- Connect coupler to TP sensor securely.
- Connect battery negative cable to battery.