Engine Coolant Temperature (ECT) Sensor Removal and Installation Removal: Installation

WARNING: This page is about a different car, the 2004 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure noting the following.

Clean mating surfaces of sensor and water outlet cap.
Tighten ECT sensor (1) to specified torque.
Tightening torque

ECT sensor (a): 13 N.m (1.3 kg-m, 9.5 Lb-ft)

Fig 1: Connecting Connector To ECT Sensor
Courtesy of SUZUKI OF AMERICA CORP.
Connect connector to sensor securely.
Refill cooling system.