Section 25 (Front Suspension): Specifications
WARNING: This page is about a different car, the 2004 Suzuki Aerio, 2003 Suzuki Aerio, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kg-m | lb-ft | |
| Tie-rod end lock nut | 45 | 4.5 | 32.5 |
| Stabilizer bar mounting bracket bolt | 23 | 2.3 | 17.0 |
| Stabilizer joint nut | 50 | 5.0 | 36.5 |
| Strut bracket nut | 105 | 10.5 | 76.0 |
| Strut support nut | 28 | 2.8 | 20.5 |
| Brake hose mounting bolt | 25 | 2.5 | 18.0 |
| Wheel nut | 85 | 8.5 | 61.5 |
| Strut nut | 70 | 7.0 | 50.5 |
| Suspension arm ball joint nut | 60 | 6.0 | 43.5 |
| ABS wheel speed sensor mounting bolt | 23 | 2.3 | 17.0 |
| Tie-rod end castle nut | 45 | 4.5 | 32.5 |
| Caliper carrier bolt | 85 | 8.5 | 61.5 |
| Drive shaft nut | 175 | 17.5 | 127.0 |
| Control arm mounting bolt | 90 | 9.0 | 65.0 |
| Suspension frame mounting bolt | 90 | 9.0 | 65.0 |
| Mounting member nut | 55 | 5.5 | 40.0 |
| Engine rear mounting nut | 45 | 4.5 | 33.0 |
NOTE:
The specified tightening torque is described in the following.