Suspension Control Arm / Bushing Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2004 Suzuki Aerio, 2003 Suzuki Aerio, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.

Cut rubber (1) of flange of suspension control arm front bushing.
Using grinder (3), grind off flange (2) of front bushing.
CAUTION: Be careful not to damage suspension control arm (4) when grinding flange (2) of front bushing with grinder.

Fig 1: Grinding Off Flange Of Front Bushing
Courtesy of SUZUKI OF AMERICA CORP.
Remove front bushing (1) using special tool (A) and hydraulic press (2).
Special tool

(A): 09913-75821

Fig 2: Removing Front Bushing & Hydraulic Press

Courtesy of SUZUKI OF AMERICA CORP.