Front Parallel Link: Installation
WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front parallel link bolt-to-knuckle and the cam bolt-to-rear crossmember. Tighten the front parallel link bolt-to-knuckle to 81 Ft. Lbs. (110 N.m)
- Adjust the rear toe, if needed. See SPECIFICATIONS & PROCEDURES - VERONA article.
- Tighten the front parallel link bolt. Tighten the cam bolt to 59 Ft. Lbs. (80 N.m).