Stabilizer Link: Installation
WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
- Install the stabilizer link and nuts. See Figure.CAUTION: The weight of the vehicle must be supported by the control arms before the stabllizer-link-to-control arm nuts or the stabilizer shaft-to-stabilizer link nuts are tightened. This can be done by lowering the vehicle onto jack stands under the control arms.
- Lower the vehicle so the control arms are supported by jack stands. Tighten the stabilizer link nuts to 37 Ft. Lbs. (50 N.m).