Control Arm: Disassembly

WARNING: This page is about a different car, the 2004 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Remove the control arm. See REMOVAL .
Remove the control arm rear bushing using a press, the Removal Plate (M-307-B) and a drift. See Fig 1.
Remove the control arm front bushing using a press, the Remover/Installer (M-508-A)and the Removal Plate (KM-307-B). See Fig 2.

Fig 1: Removing Control Arm Rear Bushing

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Removing Control Arm Front Bushing

Courtesy of SUZUKI OF AMERICA CORP.