LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Aerio SX, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Repair Instructions >> Transfer Assembly Disassembly and Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transfer Assembly Disassembly and Assembly: Disassembly

NOTE: It is possible to disassemble transfer assembly without removing intermediate shaft with Step  1 to  4 performed if not necessary.
  1. Remove intermediate output oil seal (1) from transfer right case (5).
  2. Remove snap ring (2) by using special tool.

    Special tool 

    : 09952-76011

  3. Remove intermediate shaft (4) with intermediate shaft bearing (3).
  4. Remove intermediate shaft bearing (3) from intermediate shaft (4) by using bearing puller and press.
    Fig 1: Removing Intermediate Output Oil Seal, Shaft, Shaft Bearing & Snap Ring
    G00784108Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove transfer output retainer assembly (1) and shims (3) by removing 4 bolts (2).
  6. Remove 9 transfer case bolts (4).
  7. Separate transfer right case (5) from transfer left case (6) by using special tool.

    Special tool 

    (A): 09912-34510

  8. Remove reduction drive gear assembly (7), reduction idler gear assembly (8) and reduction driven gear assembly (9).
  9. Remove reduction idler gear taper roller bearing outer race (10), shim (11) and reduction driven gear RH taper roller bearing outer race (12) from transfer right case (5).
  10. Remove reduction idler gear taper roller bearing outer race (10), reduction driven gear LH taper roller bearing outer race (13) from transfer left case (6).
    NOTE: When it is difficult to remove taper roller bearing outer races from cases, remove them with special tool.

    Special tool 

    (B): 09941-54911

    Fig 2: Disassembling Transfer Assembly
    G00784109Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals