Suspension Control Arm / Bushing Disassembly and Assembly: Disassembly

1. Cut rubber (1) of flange of suspension control arm front bushing.
2. Using grinder (3), grind off flange (2) of front bushing.
   CAUTION: Be careful not to damage suspension control arm (4) when grinding flange (2) of front bushing with grinder.
   Fig 1: Grinding Off Flange Of Front Bushing

   Courtesy of SUZUKI OF AMERICA CORP.
3. Remove front bushing (1) using special tool (A) and hydraulic press (2).

   Special tool 

   (A): 09913-75821

Fig 2: Removing Front Bushing & Hydraulic Press

Courtesy of SUZUKI OF AMERICA CORP.