Torque Specifications: VERONA
WARNING: This page is about a different car, the 2004 Suzuki Verona and 2004 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS (FRONT)
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Caliper Brake Hose Inlet Bolt | 40 | 30 | - |
| Caliper Bracket Mounting Bolts | 95 | 70 | - |
| Caliper Mounting Bolts | 27 | 19 | - |
| Rotor Detent Screw | 4 | - | 35 |
| Splash Shield Steering Knuckle Bolts | 25 | 18 | - |
TIGHTENING TORQUE SPECIFICATIONS (REAR)
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Brake Hose Inlet Bolt and Ring Seals | 32 | 24 | - |
| Caliper Mounting Bolts | 45 | 33 | - |
| Lower Caliper Mounting Bolt | 31 | 23 | - |
| Parking Brake Shoe Hold-Down Spring Assembly Screw | 4 | - | 35 |
| Rotor Detent Screw | 4 | - | 35 |
| Hub Bolts | 65 | 48 | - |
TIGHTENING TORQUE SPECIFICATIONS (BRAKE CONTROL SYSTEMS)
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Bleeder Valve | 6 | - | 53 |
| Brake Lines Fittings | 16 | 12 | - |
| Brake Pedal-to-Pedal Bracket Hex Nut | 18 | 13 | - |
| Front Disc Brake Hose-to-Caliper Bolt | 40 | 30 | - |
| Rear Disc Brake Hose-to-Caliper Bolt | 32 | 24 | - |
| Trim Panel Screws | 3 | - | 27 |
| Master Cylinder Mounting Nuts | 13 | - | 115 |
| Master Cylinder Brake Lines | 16 | 12 | - |
| Proportioning Valve Brake Lines | 16 | 12 | - |
| Proportioning Valve Nut | 10 | 7 | - |
| Booster-to-Dash Panel Nuts | 22 | 16 | - |
| Booster Pushrod Hex Nut | 18 | 13 | - |
| Pushrod Clevis | 18 | 13 | - |