Torque Specifications: FORENZA
WARNING: This page is about a different car, the 2004 Suzuki Verona and 2004 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS (FRONT)
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Brake Hose Inlet Fitting-to-Caliper Bolt | 40 | 30 | - |
| Caliper Bleeder Valve | 8 | - | 71 |
| Caliper-to-Steering Knuckle Mounting Bolts | 95 | 70 | - |
| Retaining Frame-to-Caliper Housing Bolts | 27 | 20 | - |
| Rotor-to-Front Wheel Hub Detent Screw | 4 | - | 35 |
| Splash Shield-to-Steering Knuckle Screws | 4 | - | 35 |
TIGHTENING TORQUE SPECIFICATIONS (REAR)
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Brake Hose Inlet Bolt and Ring Seals | 32 | 24 | - |
| Caliper Mounting Bolts | 56 | 41 | - |
| Lower Caliper Mounting Bolt | 27 | 20 | - |
| Parking Brake Shoe Hold-Down Spring Assembly Screw | 4 | - | 35 |
| Rotor Detent Screw | 4 | - | 35 |
| Hub Bolts | 65 | 48 | - |
TIGHTENING TORQUE SPECIFICATIONS (BRAKE CONTROL SYSTEMS)
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Bleeder Screw | 8 | - | 71 |
| Brake Lines | 16 | 12 | - |
| Brake Pedal-to-Pedal Bracket Hex Nut | 18 | 13 | - |
| Front Disc Brake Hose-to-Caliper Bolt | 40 | 30 | - |
| Rear Disc Brake Hose-to-Caliper Bolt | 32 | 24 | - |
| Master Cylinder Attaching Nuts | 18 | 13 | - |
| Proportioning Valves | 22 | 16 | - |
| Booster-to-Bracket Nuts (Right-Hand Drive) | 22 | 16 | - |
| Booster-to-Dash Panel Nut (Left-Hand Drive) | 22 | 16 | - |
| Booster Hex Nut and Pushrod Clevis | 18 | 13 | - |
| Brake Line Fittings | 16 | 12 | - |