Rear Wheel Speed Sensor Removal and Installation: Removal

Disconnect negative cable at battery.
Remove quarter inner trim (1).

Fig 1: Removing Quarter Inner Trim
Courtesy of SUZUKI OF AMERICA CORP.
Turn over floor carpet.
Hoist vehicle.
Disconnect rear wheel speed sensor coupler (1).
Detach ABS wheel sensor wire harness (2).
NOTE: Do not detach clip of rear wheel speed sensor connector from vehicle body unless replacement is necessary.
Remove rear wheel speed sensor (3) from knuckle.
CAUTION:
- Do not pull wire harness when removing rear wheel speed sensor.
- Do not cause damage to surface of rear wheel speed sensor and do not allow dust, etc. to enter its installation hole.
Fig 2: Removing Rear Wheel Speed Sensor
Courtesy of SUZUKI OF AMERICA CORP.