Heater Controller Removal and Installation: Installation

Reverse removal procedure to install heater controller noting the following instructions.

Set air flow selector (1) and temperature selector (2) as shown in figure.

Fig 1: Setting Selectors
Courtesy of SUZUKI OF AMERICA CORP.
Push air flow selector link (1) and temperature selector link (2) fully in arrow direction.
Fix air flow selector cable (3) and temperature selector cable (4) with clamp in position as shown in figure.

Fig 2: Fixing Selector Cables

Courtesy of SUZUKI OF AMERICA CORP.

NOTE: After installing selector cables, be sure that air flow selector and temperature selector move smoothly and stop at proper position.