When replacing compressor
WARNING: This page is about a different car, the 2003 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
Compressor oil is sealed in each new compressor by the amount required for A/C system. Therefore, when using a new compressor for replacement, drain excess oil from it by the amount calculated as follows.
"C" = "A" - "B"
"C": Amount of oil to be drained
"A": Amount of oil sealed in a new compressor
"B": Amount of oil remaining in removed compressor
NOTE:
Compressor assembly supplied from factory is filled up with the following amount of oil.
Oil amount in compressor
100 cm 3 (100 cc)