Front Disc Brake Pads: Installation
WARNING: This page is about a different car, the 2004 Suzuki Verona and 2004 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- If new pads are installed, use syringe to remove some brake fluid from reservoir. Using appropriate tool, push in caliper piston. Install pads.
- Pull caliper downward, without damaging piston dust seal. Install lower caliper sliding pin. Tighten caliper sliding pins. Align marks during wheel removal and install front wheel. Tighten wheel lug nuts.