19. Valve Body Assembly Disassembly and Reassembly

Part 1 Of 2:

Part 2 Of 2:

Valve Body Assembly Disassembly and Reassembly
Disassembly
1. Pull out manual valve.





2. Remove solenoid valves by removing bolts.

Reassembly





1. Install solenoid valves to valve body and tighten bolts to specified torque.
Tightening torque
Shift solenoid bolts (a): 7.0 Nm (0.7 kgf-cm, 5.0 ft. lbs.)
Pressure control solenoid bolt (b): 7.0 Nm (0.7 kgf-cm, 5.0 ft. lbs.)

NOTE:
^ Don't reuse solenoid valve O-rings.
^ Shift solenoid valve-A (No.1) and shift solenoid valve-B (No.2) are interchangeable with each other.

2. Install manual shift valve to valve body.