LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2003 >> XL-7 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls - System & Component Testing) >> Emission Systems & Sub-Systems >> Fuel Evaporation >> EVAP Canister Purge System Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVAP Canister Purge System Inspection

WARNING: This page is about a different car, the 2002 Suzuki XL-7, 2002 Suzuki Vitara, 2002 Suzuki Grand Vitara, 2002 Suzuki Esteem, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before inspection, shift transmission to "neutral" (M/T) or "P" (A/T) and pull parking brake all the way up.
  1. Disconnect purge hose from pipe in engine room. Place finger against the end of disconnected hose and check that vacuum is not felt there when engine is cool and running at idle speed.
  2. Connect purge hose to pipe and warm up engine to normal operating temperature. Disconnect purge hose from pipe and check that vacuum is felt when engine is running. If operation is not as described, check vacuum passage, hoses, EVAP canister purge valve, wire harness and ECM.
scientia non olet · About LEMON Manuals